Test: From travel time to position (satellite positioning)
Animated demo
From travel time to position: why the clock matters
1. One signal, one distance
Each satellite broadcasts the time on its atomic clock. Press Send: a signal leaves satellite B and the receiver notes when it arrives. The travel time multiplied by the speed of light is the distance, here about 67.65 ms × 299,792 km/s ≈ 20,281 km. One distance places the receiver somewhere on a circle around the satellite. In the close-up, that circle is almost a straight line.
Slowed 60 times: the signal takes about 70 ms.
Travel time, satellite B
…
Range = time × c
…
| Satellite | Measured travel time | Measured range | Range error |
|---|---|---|---|
| A | … | … | … |
| B | … | … | … |
| C | … | … | … |
What this figure does not model: the third dimension (it is a flat slice through the Earth, so three satellites do the work of four), the satellites’ motion, the ionosphere, the troposphere and multipath, receiver noise, and the geometry effects (dilution of precision) covered later in this section.
© 2026 Derek Molloy, Dublin City University. All rights reserved.